Description
ICON’s 2.5 VS Series Remote Reservoir Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to 2005-2016 F-250 and F-350 trucks. The advantage of utilizing a coilover conversion kit is that they have been designed to increase the overall damping ability of the vehicle while at the same time allowing for user-defined ride height adjustment. The 2.5″ Remote Reservoir Coilover featured in these kits is based off of ICON’s 2.5 VS Series shock line – meaning that features like Eibach coil springs, FK Rod End bearings, and vehicle-specific valving come standard. Quality machined components and a fully serviceable design make for a product that will stand the test of time, yet retain the ability to be rebuilt or re-valved as necessary.
Specifications:
| Add-On Part | 198000 – 2 PIN COILOVER SPANNER WRENCH KIT |
| Add-On Part | 198001 – BILLET SPANNER WRENCH KIT |
| Add-On Part | 64039 – 08-UP FSD TRACK BAR BUMP STEER BRACKET KIT |
| California Proposition 65 | WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
| Description_ASC | APPLICATION NOTE #30: AN ADJUSTABLE TRACK BAR MAY BE NEEDED TO REALIGN THE AXLE FROM LEFT TO RIGHT, OR TO ADD ADDITIONAL STRENGTH |
| Description_ASC | APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE |
| Description_ASC | APPLICATION NOTE #6: SPRINGS ARE RATED FOR DIESEL ENGINES ONLY |
| Description_ASC | APPLICATION NOTE #88: REMOVAL OF THE COIL CENTERING CUP IN FACTORY COIL BUCKET REQUIRED FOR INSTALLATION. |
| Description_ASC | OEM Wheels & Tires Fitment: Yes |
| Description_ASC | Recommended Aftermarket Tires: 35″ x 12.50″ (Larger tires may fit but fender trimming and modifications will be required.) |
| Description_ASC | Recommended Aftermarket Wheels: ICON Alloys | 17×8.5″ w/ 5.00” Backspace / 6mm Offset |
| Description_ASC | Recommended Aftermarket Wheels: ICON Alloys | 18×9″ w/ 5.25” Backspace / 6mm Offset |
| Description_ASC | Recommended Aftermarket Wheels: ICON Alloys | 20×9″ w/ 5.25” Backspace / 6mm Offset |
| Description_ASC | Ships in multiple boxes |
| Description_ASC | TECH NOTE: 2005-2016 F-250s require 4” rear blocks with 15” U-bolt kit to sit level with 2.5” lifted front. ICON block kit part # 194275 and U-bolt kit part # 37003 (2005-2010 models) or part # 67003 (2011-2016 models) are recommended. |
| Description_DEF | Suspension Lift Kit |
| Description_DES | 05-16 FORD F250/F350 2.5-3″ STAGE 1 COILOVER CONVERSION SYSTEM |
| Description_DES | 05-UP FSD 2.5″ 2.5 VS RR BOLT IN CO CONVERSION KIT |
| Description_DES | 99-16 FSD 4WD 3-6″ REAR 2.0 VS IR |
| Description_EXT | 2005-2016 FORD F-250/F-350 2.5-3″ LIFT STAGE 1 COILOVER CONVERSION SYSTEM |
| Description_FAB | Bolt-in system fits in OE coil bucket location |
| Description_FAB | Coilover conversion allows for addition of secondary shock |
| Description_FAB | Corrosion resistant CAD plated coilover shock body with 7/8″ shaft |
| Description_FAB | Decreased body roll and improved on and off-road ride dynamics |
| Description_FAB | Eibach coil springs guaranteed for life against sagging or breakage |
| Description_FAB | FK Rod End bearings for extended longevity and minimal deflection |
| Description_FAB | Ride height adjustable coilovers (2.5-3″) |
| Description_FAB | Shocks are fully rebuildable and revalveable |
| Description_FAB | Vehicle-specific shock valving provides unparalleled ride quality and control |
| Description_INV | 05-16 FSD 2.5-3″ STG 1 CO CONV SYSTEM |
| Description_MKT | ICON’s 2.5 VS Series Remote Reservoir Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to 2005-2016 F-250 and F-350 trucks. The advantage of utilizing a coilover conversion kit is that they have been designed to increase the overall damping ability of the vehicle while at the same time allowing for user-defined ride height adjustment. The 2.5″ Remote Reservoir Coilover featured in these kits is based off of ICON’s 2.5 VS Series shock line – meaning that features like Eibach coil springs, FK Rod End bearings, and vehicle-specific valving come standard. Quality machined components and a fully serviceable design make for a product that will stand the test of time, yet retain the ability to be rebuilt or re-valved as necessary. |
| Description_SHO | SUSPENSION SYSTEM |
| Description_TRA | ICON 2005-2016 Ford F250/F350, 2.5-3″ Lift, Stage 1 Coilover Conversion System, K63101 |
| height | 7.0 |
| length | 31.0 |
| LTL | N |
| Title | 05-16 FORD F250/F350 2.5-3″ STAGE 1 COILOVER CONVERSION SYSTEM |
| weight | 78.0 |
| width | 13.0 |
Explore more from our collection.
Reviews
There are no reviews yet.